PowerBolt Tattoo Battery Supply

Unleash your power! If you love the Spektra Flux, you know the PowerBolt is the brain and power supply of the machine. The detachable PowerBolt battery supply provides an extra peace of mind. Two is better than one–especially for those artists that are on the road or want a backup for when the battery is running low. Attaching and detaching the PowerBolt is easy with just a quick quarter-turn. Simply recharge as needed. Just plug into a USB-C cable, the same you use for an iPad or smartphone.

The PowerBolt provides the ultimate peace of mind in backup for busy artists. Are you ready to flex your Flux?

• Battery supply for the Flux wireless tattoo machine
• Detach and attach effortlessly with 1/4 turn
• Battery life: Up to 10 hours. Can charge as quickly as 2 hours when used with a proper voltage USB-C power source and USB-C cord. Note: Longer power cords and weaker power sources will result on the unit taking a long time to charge or not charging at all.
• USB-C port: Charge your PowerBolt from any standard USB-C cord. This is perfect for the traveling artist or for trade shows
• LED Indicator : Easily check your operating voltage and battery life
• Changing Voltage: Simply decrease and increase voltage by half increments via two buttons
• Darklab App : Change voltage through voice, access tattoo time and receive firmware updates
• Manufactured in the USA

*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:

https://www.fkirons.com/pages/request-repair

Critical Atom X Power Supply

• Compatible with Coil and Rotary machines
• Built in Neodymium magnets for a strong hold
• Jump start Enabled for hard starting machines
• 6 amp peak inrush current, 3 amp true RMS continuous current
• Pedal override button (no need for a foot pedal if you run continuous mode)
• Precision regulated set point voltage 0-17vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• 2 Voltage presets
• Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non volatile memory (holds presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections
• Easily bagged with typical machine or bottle baggies
• Additional mounting options available in store
• 2 year full mfg warranty
• Made in the USA

LightningBolt Battery Pack

It’s time to cut the cord. Welcome to the Wireless Revolution!

With the LightingBolt your favorite tattoo machine just became wireless. That’s right! Your favorite rotary machine just got a lot better. The LightingBolt is not only a tattoo battery pack, but a Bluetooth enabled power controller that is truly the future of tattooing. We know the feeling of our arm hurting mid-tattoo, having to stretch, only to lose focus and not concentrate on our craft. 

The best tattoo battery pack is here to make your life easier.  Small but powerful, the LightingBolt is sure to make your art better. With a lightweight design, friendly user-interface and an ergonomic design, the LightingBolt was made with the artist in mind.  The LightingBolt tattoo battery pack was made to help captivate your art effortlessly. 

• Immerse yourself in art with a wireless tattoo battery pack that turns your tattoo machine wireless
• Connect to Bluetooth and pair with the DarkLab mobile app to enable a host of features and receive firmware updates. Features include changing voltage through voice
• Ideal for rotary and coil tattoo machines
• Battery can last up to 10 hours with only 1.5 hours of charge time
• Charge your battery pack in any USB-C port, including your car, airport, or laptop. Perfect for the traveling tattoo artist or when you attend a tradeshow
• Software and hardware work seamlessly together to provide you the best experience 
• Operates from 5 volts to a maximum of 12 volts 
• Only 3 buttons that allow you to check the battery, enable Bluetooth, increase and decrease the voltage, check battery life and turn off/on 
• LED color indicator lights allow you to monitor your voltage and battery life 
• The best things come in small, powerful packages, LightingBolt weights only 58g (2 oz)

*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:

https://www.fkirons.com/pages/request-repair

PowerBolt II Tattoo Battery Supply

The PowerBolt II is the first device to usher in the next generation of wireless batteries.

Backwards compatible – Take your Flux Max, EXO, or Flux to the max with next-level intelligence.

Tech Specs

• Our first, digital built-in menu to select settings
• Easily detachable and compatible with all wireless FK Irons machines (Flux Max, EXO, Flux)
• State-of-the-art motherboard that learns how you like to work, “senses” and adapts in real-time
• Native Killswitch connectivity and improved range
• Responsive eGive settings (0-3)
• Voltage and Hertz readout (adjust by 0.1V or 0.5V)
• Easily read battery life and built-in session timer
• Left- and right-hand screen orientation
• Battery firmware updates via the Darklab app
• Battery life: An average of 5-6 hours of battery life, dependent on functional preferences*.Full charge in 2 hours when used with the included USB-C charging cable.
  *needle resistance, machine speed (voltage/hertz), and stroke

*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:

https://www.fkirons.com/pages/request-repair

Hexko X - Power Supply The new Hexko Power Supply
The design and performance was created for the artist to work easily and at their best. Hardware and software optimization for processing speed. Easy-to-use interface and innovative features. The speed of the HEXKO touch screen is super fast.

- 5" TFT LCD 800x480 display with full touch screen capability
- Accepts standard 1/4" mono jacks clip cord and footswitch connections
- Voltage memory and name set up on mobile application
- Voltage presets with 8 machine memory and name modes
- Set jump start to easy click for hard starting machine
- Precision regulated set point voltage 1.3-17v dc
- Universal input 110-240V AC 50/60hz
- Non-volatile memory
- Machine real run time
- Session work run time
- Strong built in magnets under silicone allow for use on a variety of workstations

LightningBolt UNI Wireless Battery Pack

FK Irons strives to develop products to revolutionize and innovate the tattoo industry. That’s why we engineered a powerful battery that’s not only well-balanced but can be universally connected to any RCA machine on the current market. It’s the one battery to power them all.

This revolutionary power supply can be connected to any RCA machine - as long as the RCA jack isn’t blocked. Its compact design is great for easy travel, and it keeps in mind the machine’s Ergonomic Balance Point. Weighing at only 2 oz, the LightningBolt Uni may be small, but can still power your machines for up to 10 hours - depending on voltage. That’s power. The LightningBolt Uni was designed to be the only power supply artists need and provide power for all.

• Immerse yourself in art with a wireless tattoo battery pack that turns your tattoo machine wireless
• Ideal for the EXO and all RCA tattoo machines
• Battery can last up to 10 hours with only 1.5 hours of charge time
• Charge your battery pack in any USB-C port, including your car, airport, or from your laptop. Perfect for the traveling tattoo artist or when you attend a tradeshow
• Software and hardware work seamlessly together to provide you the best experience 
• Operates from 5 volts to a maximum of 12 volts 
• Only 3 buttons that allow you to check the battery, enable Bluetooth, increase and decrease the voltage, check battery life and turn off/on 
• LED color indicator lights allow you to monitor your voltage and battery life 
• Good things come in small, powerful packages, LightningBolt UNI weights only 58g (2 oz)
• NOT compatible with the Microbeau Bellar

Due to cross contamination issues, and that all Darklab and FK Irons devices are custom built to order, and as such we do not accept returns. All device sales are final. We do, however, have a guarantee for all of our battery packs.

*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:

https://www.fkirons.com/pages/request-repair

Digital Power Supply LCD Display

• Fully digital microprocessor control
• Precision regulated set point voltage 0-18volts
• 2.3 amp built in overload protection
• User selectable resolution .1, .2, or .5 volt increments
• Time of day
• Stop-Watch
• Liner/ Shader presets now with 2 machine or 4 machine memory modes.
• Foot pedal can be set up as Momentary or Maintained:
   Momentary (press foot down to power on, lift foot up to power off)
   Maintained (press foot down once to power on, press foot again to power off) foot switch modes. Easy one button toggle between modes.
• Non volatile memory (holds time and presets even when power is removed)
• Universal input 110-240vac 50/60hz,  Excepts standard clip cord and foot pedal connections 
• LCD digital display shows: Volts, Amps, Speed (HZ), Duty Cycle (%)
• Wipes down easily, and easily bagged with typical machine or bottle baggies
• Power supply includes 4 suction cup feet and 4 magnetic feet. 

Illusionist Wireless Power Supply - RCA Connection

Package Includes:

Charging Cable 

Power Supply RCA

LCD Dual Digital Power Supply

• Input: AC 110/220V, 50-60HZ
• Output: DC 1.5-18V,2A
• Dimension: Approx 14 × 12.5 × 7.6cm
• One liner output, one shader output
• Slimply flip switch to change from one tattoo machine to another
• Provides solid and consistent 1.5 amp output
• Adjusts from 1.5 volts to 18 volts

• NEW! 6 amp peak current, 4 amp true continuous current
• NEW! Session machine run time meter
• NEW! Total machine run time (odometer)
• NEW! Session time
• NEW! Session currency meter (based on hourly rate set by user)
• NEW! Pedal override button (no need for a foot pedal if you run continuous mode)
• Precision regulated set point voltage 0-18vdc
• Built in short circuit protection
• .1 volt adjustment resolution
• Time of day Voltage presets with 2, 4, or 6 machine memory modes
• Momentary or Maintained foot switch modes. (Easy one button toggle)
• Non-volatile memory (holds time and presets even when power is removed)
• Universal input 110-240vac 50/60hz
• Accepts standard 1/4″ clip cord and foot pedal connections Volts, Amps, Speed (hz), Duty Cycle (%), and STL
• Easily bagged with typical machine or bottle baggies
• Power supply includes one magnetic universal mount

RS POWER

Made of steel and aluminum

Magnetic base

Working range: 1,8-11,8 volts, max 3A Weight: 315gr

Size (w/o adapter) 66*66*63mm Power adapter (EU Plug) included

Embrace the wireless revolution with a touchless tattoo power supply. With just a simple air gesture from your hand or hover of your fingers, you can change your voltage, cycle through menu screens and set a timer to register when you start/stop a tattoo session. Without ever touching the device, you will be helping to prevent cross-contamination. 

The Hover makes your life easier with its functional, round design, strong magnet, sensors and Bluetooth. Connect to the soon to be deployed Darklab app to change the voltage using voice command and take advantage of the latest firmware updates with ever-developing features.

Equipped with two input ports, you can utilize a machine and footwitch combination or connect two machines at the same time, which is perfect for artists that use different tattoo machines in one sitting. If you need to stop mid-tattoo, the Hover remembers the last voltage you were on. With the bank management system you can save up to 9 of your favorite settings. Quickly set up your machine to your favorite presets for different stages of the tattoo, such as lining, coloring and shading, saving you time!

With USB-A and USB-C ports, charge mobile devices such as tablets, cellphones and Darklab battery packs. The Hover makes travel easy for those artists that are always on the go or attending trade shows.

• Easy to use touch-free power supply
• Prevent cross-contamination
• Increase and decrease voltage with hand gestures
• Bluetooth compatibility allows you to connect with the free Darklab mobile app for Android and iOS
• Darklab mobile app allows you to change voltage through voice, register tattoo time and receive firmware updates
• 9 programmable presets to save desired voltage, you can revisit them at any time
• 2 input ports allow you to connect two different tattoo machines, perfect for artists that use multiple devices
• Footswitch compatible 
• USB charging ports that can charge cellphones, tablets and DarkLab power supplies
• 2 – 17 Voltage output
• Machine voltage readout
• Anti-slip magnetic base
• Set a timer to keep track of tattoo session time

**It is recommended and important to use clear barrier film when covering the Hover**

*Please note: With any issues or faults as per FK Irons Instructions please contact them directly before contacting American Body Art, as they will be best in helping with any issues. Link below:

https://www.fkirons.com/pages/request-repair

Thunderlord Power Supply LCD Display

• Display: LCD Digital
• Dimension of power unit:16cm*9cm*9cm
• Unit Net Weight: 152g.
• Unit Gross Weight: 650g
• Input voltage: 110V-240V, AC50/60Hz.
• Output Voltage: 3~18v
• Output Power: 0.3-45W
• Rating Current: 0-2A.
• Color: Blue, White, Red, Green
  –Liner/ Shader presets with memory modes.
  –Momentary(conventional) or Maintained(push on push off) foot switch modes. Easy one button toggle
  –Non volatile memory (holds time and presets even when power is removed)
  –Volts, Amps, Speed (hz), Duty Cycle (%), and STL(similar to follow through)
  –Wipe down quality
  –Easily bagged with typical machine or bottle baggies
  
  

 Killswitch Wireless Footswitch

*Only Compatible with PowerBolt+ Plus

Toggling your device's power during sessions just got easier with the Killswitch, FK Irons' first ever power switch featuring an accelerometer sensor with no mechanical parts for complete wireless control.

You can simply turn your device ON or OFF with just a tap of the device, and its built-in anti-slip mount allows it to stay in place. This device is built with sanitation in mind, minimizing cross-contamination to keep your workplace clean - wirelessly. 

Connect the Killswitch with the Darklab app via Bluetooth to keep your device up-to-date with the latest firmware updates.

Tap into the future with more power thanks to the game-changing technology of the  Killswitch and Powerbolt+ bundle. Combined to put even more control into the palm of your hand, our bundle expands artists' capabilities that unlock more possibilities than ever before.  

Features:

• Powered controlled by an accelerometer sensor with no mechanical parts
• Responsive and charged LED indicators
• Anti-slip mount to keep it in place
• Internal, rechargeable battery 
• Designed to keep sanitation in mind
• Stay up-to-date with Firmware updates via iOS Darklab app
• Compatible with Powerbolt+, Lightningbolt battery packs and Airbolt power banks  (not compatible with the original PowerBolt)

Technical data:

• Diameter x Height: 95 mm x 20 mm
• Weight: 104g/3.6oz
• Material: TPE
• Charging Voltage: 5 V DC
• Charging Current: 0.5 A
• Ambient Temperature: +10 to +35 °C
• Relative Humidity: 30 to 75%
• Charging Port: USB-C